
Assembled unit!
Technical description:
· Rotary encoder tuning
· Selectable tuning steps – 5Hz, 50Hz, 100Hz, 1kHz, 5Khz, 10kHz, 1 MHz
· Simultaneous VFO and BFO oscillator outputs (could be customized in menu)
· S-meter display function
· Programmable start-up frequencies
· Atmel Attiny85 processor
· 16 x 2 compact LCD
· Programmable si5351a reference crystal offset frequency
· Low current – Less than 30mA at 3.3V including any LCD backlighting
· Input voltage - 5..12V; the voltage regulator 2950CT33 --> +3.3V
- dimensions: 77х35 мм
menu "custom settings and calibration".
In the new firmware version through the menu user can change the following settings:
- the value of IF (+IF, -If, IF=0):
- change the frequency reference generator or power down the output CLK1
- Accurate calibration of the synthesizer
- Self-adjustment of the start-up frequency when you turn on the synthesizer
Synthesizer can be used as a local oscillator (VFO) and reference generator (BFO) in the Amateur radio receiving and transmitting structures with a single frequency conversion, and as a local oscillator (VFO) in the construction of direct frequency conversion
Encoder is included!